Description

WARFET is GATE’s most advanced AEG Control System. It has 20 functions and almost 6 million possible configurations. 

Thanks to the Smart Trigger and Pre-cocking functions, tr igger response is similar to a real gun. The Programmable Burst (1-5 rounds) enables you to fire a p re-determined number of BBs. Another function is ROF Control, which allows you to reduce ROF, so you can use strong LiPo batteries, and still have ROF just like in a real rifle.

If your AEG bec omes jammed, the Smart Fuse protects the battery and the motor against damage. Moreover, with WARFET you get: Mosfet, ON/OFF Active Brake, Built-in self-test, Debouncing, and more. Many useful functio ns, great electrical specifications and conformal coating (military specifications: MIL-V-173C) make the AEG Control System able to meet the needs of most experienced airsoft players.

SUPER-EAS Y INSTALLATION - JUST PLUG&PLAY, NO SOLDERING REQUIRED

Key functions:
MOSFET transmits the energy from the battery directly to the motor, bypassing the traditional mechanical trigger contact s. As a result, the replica gains a higher rate of fire, faster trigger response, and the contacts a re protected against burn out.

ACTIVE BRAKE in SEMI Mode does not allow for compressing a pis ton after a shot. The piston will stop in the front position which eliminates unnecessary stresses, increasing the service life of the gearbox and its parts. This is important, especially in AEG power upgrade.

ON/OFF ACTIVE BRAKE The Controller provides the option to decide if you want to use the Active Brake function. If you do not need this, you can turn it off easily. It will lead to imp roving the lifespan of your motor.
ELECTRONIC FUSE – the unit has thermal protection for increase d durability and in combination with a time-lag fuse, it fully protects your AEG installation.
DEBOUNCING - provides full compatibility with micro-switches. It ensures complete resistance to contact bounce and thanks to it the replica gain a bigger ROF, a faster trigger response and the MOSFET is less prone to overheating.

BATTERY P ROTECTION - against Over-Discharge of the Battery. The microprocessor monitors the battery voltage c onstantly. When the voltage drops down to a critical level, the Controller will not allow firing.

SMART TRIGGER - enables faster trigger response. It works with the ROF Control system. During t he first shot, the microprocessor sets the ROF Control to 100%. After the first shot, it switches to a previously programmed value (e.g. 50%). As a consequence, the first shot is fired at a full rate of fire, and subsequent shots at a reduced ROF.

CONFIGURABLE FIRE SELECTOR - gives the option to program fire selector. There are five modes:

• STOCK WIRING SEMI/AUTO
• STOCK WIR ING SEMI/BURST
• MODIFIED WIRING SEMI/AUTO
• MODIFIED WIRING SEMI/BURST
• MODIFIED WIRING BURST/AUTO

PRE-COCKING - provide a trigger reaction similar to a real gun. It a llows for initial spring compression, which speeds up the trigger response significantly. PRE-COCKIN G MODES:

1) AUTO MODE – the spring is automatically compressed after each shot,
2) TRIGGER MODE – the first trigger action compresses the spring, and the second trigger action fires the shot .
PROGRAMMABLE BURST - enables to shoot a pre-determined number of BBs (1-5 rounds). It can be se t in position AUTO MODE to BURST MODE or SEMI MODE to BURST MODE.

SMART FUSE - electronic fus e with an accurate current sensor. A combination of current, voltage and temperature measurements ma kes an AEG installation highly reliable. It protects the MOSFET against overheating, overloading and short-circuiting. If your airsoft gun becomes jammed, the function protects the motor and battery a gainst damage.

BATTERY PROTECTION - against Over-Discharge of the Battery. The microprocessor monitors the battery voltage constantly. When t he voltage drops down to a critical level, the Controller will not allow firing.

BUILT-IN SEL F-TEST This allows you to quickly check whether the device is working properly.
COATING - Thanks to its special coating the product is resistant to atmospheric conditions (Military Specification MI L-V-173C).

14.8V LI-PO READY The system can be used with batteries up to 14.8V LI-PO. Minimum operating voltage is 3V and the maximum voltage is 17V.

Please note: using PRE-COCKING incre ases wear and tear on the gearbox. PRE-COCKING is designed for SEMI mode. In the AUTO mode, it can r esult in blank shots.

Included in the kit:
WARFET Power Module
Battery Mini Tamiya adap ter
AEG Mini Tamiya adapter
Pair of Deans-T Connectors
Single Trigger Wire
Double Trigge r Wire
Warning: GATE does not guarantee the compatibility of mosfets and ETUs such as TITAN or AS TER with brushless motors. Connection of a brushless motor can cause immediate damage to the device, motor and battery, that is not covered by the warranty and can lead to a fire.